Case IH 1694 vs Valmet 8100 - compare

Compare tractors: Case IH 1694 vs Valmet 8100

Case IH 1694 vs Valmet 8100 compare - general information

Specs Case IH 1694 Valmet 8100
Brand Case IH Valmet
Model Case IH 1694 Valmet 8100
Series n.d. n.d.
Previous model
Next model
Smaller Case IH 1594
Larger
Years from 1985 to 1988 y. from 1990 to 1996 y.
Cab with ROPS No No
Reviews Case IH 1694 reviews New! Valmet 8100 reviews New!

Case IH 1694 vs Valmet 8100 - performance

Specs Case IH 1694 Valmet 8100
Maximum power (HP / kW) 112 KM (83.5 kW) 120 KM (89.5 kW)
Engine RPM 2300 rpm 1550 rpm
Fuel consumption n.d. n.d.
Fuel tank capacity n.d. n.d.
Max. speed n.d. n.d.

Case IH 1694 vs Valmet 8100 - engine

Specs Case IH 1694 Valmet 8100
Fuel type Diesel Diesel
Engine producer Case Valmet
Engine model Case Valmet
Engine type Diesel (diesel engine) Diesel (diesel engine)
Engine capacity 5.4 l. 6.6 l.
Strokes, qty n.d. n.d.
Cylinders 6 6
Compression n.d. n.d.
Bore 100 mm 108 mm
Stroke 114 mm 120 mm
Maximum torque n.d. n.d.
Air filter n.d. n.d.
Fuel filter n.d. n.d.
Fuel filter chambers, qty n.d. n.d.
Oil filter n.d. n.d.
Oil pump n.d. n.d.
Speed control (control) n.d. n.d.
Injection pump n.d. n.d.
Injectors n.d. n.d.
Injection pressure n.d. n.d.
Cooling system liquid cooled engine n.d.
Forced cooling n.d. n.d.
Cooler Yes
Thermostat Yes
Cooler type tubular-plate cooler
Coolant system capacity n.d. n.d.
Clutch n.d. n.d.

Case IH 1694 vs Valmet 8100 - turbocharger

Specs Case IH 1694 Valmet 8100
Turbocharger No No
Dual turbocharger Not applicable Not applicable
Intercooler Not applicable Not applicable
Aftercooler Not applicable Not applicable
Wastegate valve Not applicable Not applicable
Variable geometry Not applicable Not applicable
Additional parameters

Case IH 1694 vs Valmet 8100 - electronics

Specs Case IH 1694 Valmet 8100
Supply voltage starter (V) 12 V n.d.
Ground n.d. n.d.
Battery (V) 12 V n.d.
Battery, qty 1 n.d.
Charging system Alternator Generator
Charging system producer n.d. n.d.
Ignition Electric Manual
Rear stop lamp Yes Yes
Rear agricultural lamp n.d. n.d.
Cock lamp No No

Case IH 1694 vs Valmet 8100 - PTO

Specs Case IH 1694 Valmet 8100
PTO rpm 540 rpm 540 rpm
PTO control manual manual

Case IH 1694 vs Valmet 8100 - brakes

Specs Case IH 1694 Valmet 8100
ABS No No
Brake assist No No
Braking system n.d. n.d.
Differential No No
Brake type disc brakes n.d.
Discs Single

Case IH 1694 vs Valmet 8100 - dimensions

Specs Case IH 1694 Valmet 8100
Weight from 4345 kg (depending by model) from 4681 kg (depending by model)
Weight with ROPS n.d. n.d.
Weight with cab n.d. n.d.
Length n.d. 4750 mm
Height n.d. 2771 mm
Width 2007 mm n.d.
Clearance 419 mm n.d.
Rear clearance n.d. n.d.
Front track width from 1524 mm to 1930 mm n.d.
Rear track width from 1422 mm to 2134 mm n.d.
Wheelbase 2540 mm 2540 mm
Front tires 13.6-28 14.9R28
Rear tires n.d. n.d.
Max. mass of the trailer without brakes 1500 kg 1500 kg
Max. mass of the trailer with brakes n.d. n.d.
Max. axle load n.d. n.d.
Max. total weight n.d. n.d.
Turning radius n.d. n.d.

Case IH 1694 vs Valmet 8100 - drive

Specs Case IH 1694 Valmet 8100
Drive system 4x4, MFWD, 4WD (depending by model) 4x4, MFWD, 4WD (depending by model)
Additional all-wheel drive, all four wheels at all times and it can be used full, front drive axle, mechanical drive, front drive axle all-wheel drive, all four wheels at all times and it can be used full, front drive axle, mechanical drive, front drive axle
Permanent 4-wheel drive Yes Yes
Permanent systems that constantly power all the wheels Yes Yes
Dynamic allocation of power between the axles n.d., AWD drive n.d., AWD drive
Independent Link Suspension None None
Articulated suspension
Crawler drive No No
Hydrostatic steering Yes No
Differential n.d. n.d.
Steering rod rod
Front rods n.d. n.d.
Rear planetary drives n.d. n.d.
Front planetary drives n.d. n.d.

Case IH 1694 vs Valmet 8100 - hydraulics

Specs Case IH 1694 Valmet 8100
Three-point hitch n.d. n.d.
Three-point hitch type n.d. n.d.
Three-point hitch performance n.d. n.d.
Three-point hitch pressure n.d. n.d.
Load Sensing No No
Closed n.d. n.d.
Central No No
Constant flow No No
Constant pressure No No
Control system n.d. n.d.
Pump n.d. n.d.
Two-section distributor n.d. n.d.
Quick couplings n.d. n.d.
Auto Lift n.d. n.d.

Case IH 1694 vs Valmet 8100 - transmission

Specs Case IH 1694 Valmet 8100
Synchronous transmission n.d. n.d.
Transmission mechanically synchronized No, electro-hydraulic control n/a
PowerShift Yes No
PowerShuttle No No
Additional two clutches (dual clutch gearbox), electro-hydraulic clutch control, fast shifting
Hydrostatic transmission n.d. n.d.
Forward gears 12 36
Reverse gears 4 36
Creeper n.d. n.d.

Case IH 1694 vs Valmet 8100 - equipment

Specs Case IH 1694 Valmet 8100
Clevis Yes (???) Yes (???)
Lower catch n.d. n.d.
Air conditioning n.d. n.d.