Claas Arion 430 CIS vs New Holland Workmaster 75 - compare

Claas Arion 430 CIS vs New Holland Workmaster 75 compare - general information

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Brand	Claas	New Holland
Model	Claas Arion 430 CIS	New Holland Workmaster 75
Series	n.d.	Workmaster
Previous model	–	–
Next model	–	–
Smaller	–	New Holland Workmaster 65
Larger	–	–
Years	n.d.	from 2010 y.
Cab with ROPS	No	No
Reviews	Claas Arion 430 CIS reviews New!	New Holland Workmaster 75 reviews New!

Claas Arion 430 CIS vs New Holland Workmaster 75 - performance

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Maximum power (HP / kW)	133.28 KM (98 kW)	n.d.
Engine RPM	n.d.	2500 rpm
Fuel consumption	n.d.	n.d.
Fuel tank capacity	175 l.	n.d.
Max. speed	40 km / h	n.d.

Claas Arion 430 CIS vs New Holland Workmaster 75 - engine

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Fuel type	Diesel	Diesel
Engine producer	n.d.	n.d.
Engine model	n.d.	FPT
Engine type	Diesel (diesel engine)	Diesel (diesel engine)
Engine capacity	4.525 l.	3.202 l.
Strokes, qty	n.d.	n.d.
Cylinders	4	4
Compression	n.d.	n.d.
Bore	n.d.	99 mm
Stroke	n.d.	104 mm
Maximum torque	n.d.	n.d.
Air filter	n.d.	n.d.
Fuel filter	n.d.	n.d.
Fuel filter chambers, qty	n.d.	n.d.
Oil filter	n.d.	n.d.
Oil pump	n.d.	n.d.
Speed control (control)	n.d.	n.d.
Injection pump	n.d.	n.d.
Injectors	n.d.	n.d.
Injection pressure	n.d.	n.d.
Cooling system	n.d.	liquid cooled engine
Forced cooling	n.d.	n.d.
Cooler		Yes
Thermostat		Yes
Cooler type		tubular-plate cooler
Coolant system capacity	n.d.	n.d.
Clutch	n.d.	n.d.

Claas Arion 430 CIS vs New Holland Workmaster 75 - turbocharger

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Turbocharger	No	Yes
Dual turbocharger	Not applicable	No
Intercooler	Not applicable	No
Aftercooler	Not applicable	No
Wastegate valve	Not applicable	No
Variable geometry	Not applicable	No
Additional parameters	–	–

Claas Arion 430 CIS vs New Holland Workmaster 75 - electronics

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Supply voltage starter (V)	n.d.	12 V
Ground	n.d.	negative ground
Battery (V)	n.d.	12 V
Battery, qty	n.d.	1
Charging system	Generator	Alternator
Charging system producer	n.d.	n.d.
Ignition	Manual	Electric
Rear stop lamp	Yes	Yes
Rear agricultural lamp	n.d.	n.d.
Cock lamp	No	No

Claas Arion 430 CIS vs New Holland Workmaster 75 - PTO

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
PTO min	540 rpm
PTO max	1000/1000 ECO rpm
PTO rpm		540 rpm
PTO control	manual	manual

Claas Arion 430 CIS vs New Holland Workmaster 75 - brakes

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
ABS	No	No
Brake assist	No	No
Braking system	n.d.	n.d.
Differential	No	Yes
Brake type	n.d.	disc brakes, wet brakes, mechanical
Discs	–	Single

Claas Arion 430 CIS vs New Holland Workmaster 75 - dimensions

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Weight	from 4900 kg (depending by model)	from 2294 kg to 2626 kg (depending by model)
Weight with ROPS	n.d.	n.d.
Weight with cab	4900 kg	n.d.
Length	4442 mm	3485 mm
Height	2736 mm	2421 mm
Width	n.d.	1991 mm
Clearance	n.d.	n.d.
Rear clearance	n.d.	n.d.
Front track width	n.d.	n.d.
Rear track width	n.d.	from 1516 mm to 2037 mm
Wheelbase	25640 mm	n.d.
Front tires	n.d.	n.d.
Rear tires	n.d.	n.d.
Max. mass of the trailer without brakes	1500 kg	1500 kg
Max. mass of the trailer with brakes	n.d.	n.d.
Max. axle load	n.d.	n.d.
Max. total weight	n.d.	n.d.
Turning radius	n.d.	n.d.

Claas Arion 430 CIS vs New Holland Workmaster 75 - drive

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Drive system	(depending by model)	4x4, MFWD, 4WD (depending by model)
Additional		all-wheel drive, all four wheels at all times and it can be used full, front drive axle, mechanical drive, front drive axle
Permanent 4-wheel drive	n.d.	Yes
Permanent systems that constantly power all the wheels	n/a	Yes
Dynamic allocation of power between the axles	n/a	n.d., AWD drive
Independent Link Suspension	None	None
Articulated suspension	–	–
Crawler drive	No	No
Hydrostatic steering	No	Yes
Differential	n.d.	n.d.
Steering	rod	rod
Front rods	n.d.	n.d.
Rear planetary drives	n.d.	n.d.
Front planetary drives	n.d.	n.d.

Claas Arion 430 CIS vs New Holland Workmaster 75 - hydraulics

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Three-point hitch	6500 kg	n.d.
Three-point hitch type	piston, adjustable draft and positional	n.d.
Three-point hitch performance	98 l / min	n.d.
Three-point hitch pressure	19.5 MPa	n.d.
Load Sensing	No	No
Closed	n.d.	n.d.
Central	No	No
Constant flow	No	No
Constant pressure	No	No
Control system	n.d.	n.d.
Pump	n.d.	n.d.
Two-section distributor	n.d.	n.d.
Quick couplings	n.d.	n.d.
Auto Lift	n.d.	n.d.

Claas Arion 430 CIS vs New Holland Workmaster 75 - transmission

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Synchronous transmission	n.d.	Yes
Transmission mechanically synchronized	n/a	n/a
PowerShift	No	No
PowerShuttle	No	No
Additional	–	–
Hydrostatic transmission	n.d.	n.d.
Forward gears	n.d.	8
Reverse gears	n.d.	2
Creeper	n.d.	n.d.

Claas Arion 430 CIS vs New Holland Workmaster 75 - equipment

Specs	Claas Arion 430 CIS	New Holland Workmaster 75
Clevis	Yes (???)	Yes (???)
Lower catch	n.d.	n.d.
Air conditioning	n.d.	n.d.