IMT 539 vs Zetor 5245 - compare

Compare tractors: IMT 539 vs Zetor 5245

IMT 539 vs Zetor 5245 compare - general information

Specs IMT 539 Zetor 5245
Brand IMT Zetor
Model IMT 539 Zetor 5245
Series n.d. n.d.
Previous model
Next model Zetor 3340
Smaller Zetor 5211
Larger Zetor 7245
Years from 1980 y. from 1985 to 1992 y.
Cab with ROPS No No
Reviews IMT 539 reviews New! Zetor 5245 reviews New!

IMT 539 vs Zetor 5245 - performance

Specs IMT 539 Zetor 5245
Maximum power (HP / kW) 39 KM (29.1 kW) n.d.
Engine RPM 2000 rpm 2200 rpm
Fuel consumption n.d. 251 g/kWh (2200 rpm)
Fuel tank capacity n.d. 55,4 l.
Max. speed n.d. 25 / 30 km / h

IMT 539 vs Zetor 5245 - engine

Specs IMT 539 Zetor 5245
Fuel type Diesel Diesel
Engine producer n.d. Zetor
Engine model M 33 / T Zetor Z 5201
Engine type Diesel (diesel engine) Diesel (diesel engine)
Engine capacity 2.5 l. 2,7 l.
Strokes, qty n.d. 4
Cylinders 3 4
Compression n.d. 17:1
Bore 91 mm 102 mm
Stroke 127 mm 110 mm
Maximum torque n.d. 161 Nm / 1500 rpm
Air filter n.d. dry air filter
Fuel filter n.d. fuel filter with cartridge felt-paper
Fuel filter chambers, qty n.d. 1
Oil filter n.d. line filter, full flow, type PP-8.4
Oil pump n.d. gear pump
Speed control (control) n.d. mechanical
Injection pump n.d. distributor pump with mechanical divider
Injectors n.d. pintle injector spray
Injection pressure n.d. 17 MPa
Cooling system n.d. liquid cooled engine
Forced cooling n.d. Yes, cooling water pump
Cooler Yes, with fan
Thermostat Yes
Cooler type tubular-plate cooler
Coolant system capacity n.d. 10,5 l.
Clutch n.d. friction clutch, hydraulically, single disc, dry, with independent PTO control, two-stage clutch

IMT 539 vs Zetor 5245 - turbocharger

Specs IMT 539 Zetor 5245
Turbocharger No No
Dual turbocharger Not applicable Not applicable
Intercooler Not applicable Not applicable
Aftercooler Not applicable Not applicable
Wastegate valve Not applicable Not applicable
Variable geometry Not applicable Not applicable
Additional parameters

IMT 539 vs Zetor 5245 - electronics

Specs IMT 539 Zetor 5245
Supply voltage starter (V) n.d. 12 V
Ground n.d. positive ground
Battery (V) n.d. 12 V
Battery, qty n.d. 1
Charging system Generator Generator
Charging system producer n.d. Zetor
Ignition Manual Electric
Rear stop lamp Yes Yes
Rear agricultural lamp n.d. Yes
Cock lamp No No

IMT 539 vs Zetor 5245 - PTO

Specs IMT 539 Zetor 5245
PTO rpm 540 rpm 540 rpm
PTO control manual manual

IMT 539 vs Zetor 5245 - brakes

Specs IMT 539 Zetor 5245
ABS No No
Brake assist No No
Braking system n.d. n.d.
Differential No No
Brake type n.d. drum brakes, wet brakes, hydraulic, independent, external brakes
Discs

IMT 539 vs Zetor 5245 - dimensions

Specs IMT 539 Zetor 5245
Weight from 1630 kg (depending by model) from 3500 kg (depending by model)
Weight with ROPS n.d. n.d.
Weight with cab n.d. 3500 kg
Length 2969 mm 3630 mm
Height 2029 mm 2703 mm
Width n.d. 1980 mm
Clearance n.d. 320 mm
Rear clearance n.d. 320 mm
Front track width n.d. from 1280 mm to 1750 mm
Rear track width n.d. from 1350 mm to 1800 mm
Wheelbase 1820 mm 21400 mm
Front tires 6-16 9.0-24; 9.5-24
Rear tires n.d. 13-28; 14.9-28
Max. mass of the trailer without brakes 1500 kg 1500 kg
Max. mass of the trailer with brakes n.d. 8150 kg
Max. axle load n.d. 35,32 kN
Max. total weight n.d. 5145 kg
Turning radius n.d. 9,5 m

IMT 539 vs Zetor 5245 - drive

Specs IMT 539 Zetor 5245
Drive system (depending by model) 4x4, MFWD, 4WD (depending by model)
Additional all-wheel drive, all four wheels at all times and it can be used full, front drive axle, mechanical drive, front drive axle
Permanent 4-wheel drive n.d. Yes
Permanent systems that constantly power all the wheels n/a Yes
Dynamic allocation of power between the axles n/a n.d., AWD drive
Independent Link Suspension None None
Articulated suspension
Crawler drive No No
Hydrostatic steering No No
Differential n.d. mechanically locking differential
Steering rod servomechanism
Front rods n.d. n.d.
Rear planetary drives n.d. No, roller
Front planetary drives n.d. No, roller

IMT 539 vs Zetor 5245 - hydraulics

Specs IMT 539 Zetor 5245
Three-point hitch n.d. 1750 kg
Three-point hitch type n.d. piston, adjustable draft and positional
Three-point hitch performance n.d. 32 l / min
Three-point hitch pressure n.d. 16 MPa
Load Sensing No No
Closed n.d. No
Central No No
Constant flow No No
Constant pressure No No
Control system n.d. n.d.
Pump n.d. gear pump
Two-section distributor n.d. Yes
Quick couplings n.d. 2
Auto Lift n.d. No

IMT 539 vs Zetor 5245 - transmission

Specs IMT 539 Zetor 5245
Synchronous transmission n.d. No, non-synchronized
Transmission mechanically synchronized n/a Yes
PowerShift No No
PowerShuttle No No
Additional
Hydrostatic transmission n.d. n.d.
Forward gears 6 10
Reverse gears 2 2
Creeper n.d. No

IMT 539 vs Zetor 5245 - equipment

Specs IMT 539 Zetor 5245
Clevis Yes (???) Yes
Lower catch n.d. Yes
Air conditioning n.d. Heating