Ursus C-385A vs Zetor 7245 - compare

Compare tractors: Ursus C-385A vs Zetor 7245

Specs	Ursus C-385A	Zetor 7245
Fuel type	Diesel	Diesel
Engine producer	Deutz	Zetor
Engine model	Deutz TDC 3.6 EURO III B	Zetor Z 7201
Engine type	Diesel (diesel engine)	Diesel (diesel engine)
Engine capacity	3,6 l.	3,6 l.
Strokes, qty	4	4
Cylinders	4	4
Compression	18:1	17:1
Bore	98 mm	102 mm
Stroke	120 mm	110 mm
Maximum torque	358 Nm / 1600 rpm	224 Nm / 1500 rpm
Air filter	dry air filter, two-stage, sensor contamination	dry air filter
Fuel filter		fuel filter with cartridge felt-paper
Fuel filter chambers, qty	2	1
Oil filter	line filter, full flow, type PP-8.4	line filter, full flow, type PP-8.4
Oil pump	gear pump	gear pump
Speed control (control)	mechanical	mechanical
Injection pump	direct fuel injection, Common Rail	distributor pump with mechanical divider
Injectors	multi holes injector	pintle injector spray
Injection pressure	115,74 MPa	17 MPa
Cooling system	liquid cooled engine	liquid cooled engine
Forced cooling	Yes, cooling water pump	Yes, cooling water pump
Cooler	Yes, with fan	Yes, with fan
Thermostat	Yes	Yes
Cooler type	tubular-plate cooler	tubular-plate cooler
Coolant system capacity	n.d.	11,6 l.
Clutch	friction, multi-plate clutch, double disc, dry, with independent PTO control, two-stage clutch	friction clutch, hydraulically, single disc, dry, with independent PTO control, two-stage clutch

Specs	Ursus C-385A	Zetor 7245
ABS	No	No
Brake assist	Yes, brakes with assist	No
Braking system	mechanical	n.d.
Differential	No	No
Brake type	disc brakes, wet brakes, hydraulic, pneumatic, independent, external brakes	drum brakes, wet brakes, hydraulic, independent, external brakes
Discs	Single	–

Specs	Ursus C-385A	Zetor 7245
Weight	from 3690 kg to 4160 kg (depending by model)	to 3985 kg (depending by model)
Weight with ROPS	n.d.	n.d.
Weight with cab	3690 kg	3985 kg
Length	4240 mm	3765 mm
Height	2750 mm	2737 mm
Width	2020 mm	1980 mm
Clearance	375 mm	363 mm
Rear clearance	355 mm	363 mm
Front track width	from 1570 mm to 1730 mm	from 1455 mm to 1800 mm
Rear track width	from 1448 mm to 1916 mm	from 1425 mm to 1800 mm
Wheelbase	2280 mm	22400 mm
Front tires	11.2 R24	11.2-24
Rear tires	16.9 R30	16,9-28
Max. mass of the trailer without brakes	1500 kg	1500 kg
Max. mass of the trailer with brakes	n.d.	8500 kg
Max. axle load	n.d.	35,32 kN
Max. total weight	7000 kg	5665 kg
Turning radius	n.d.	10,4 m

Specs	Ursus C-385A	Zetor 7245
Drive system	4x4, 4WD, Carraro 4x4 (depending by model)	4x4, MFWD, 4WD (depending by model)
Additional	all-wheel drive, all four wheels at all times and it can be used full	all-wheel drive, all four wheels at all times and it can be used full, front drive axle, mechanical drive, front drive axle
Permanent 4-wheel drive	Yes	Yes
Permanent systems that constantly power all the wheels	Yes	Yes
Dynamic allocation of power between the axles	n.d., AWD drive	n.d., AWD drive
Independent Link Suspension	None	None
Articulated suspension	–	–
Crawler drive	No	No
Hydrostatic steering	Yes	No
Differential	electrohydraulic locking differential	mechanically locking differential
Steering	servomechanism	servomechanism
Front rods	Yes	n.d.
Rear planetary drives	Yes	No, roller
Front planetary drives	Yes	No, roller

Specs	Ursus C-385A	Zetor 7245
Three-point hitch	3100 kg	2400 kg
Three-point hitch type	EHR, adjustable draft and positional	piston, adjustable draft and positional
Three-point hitch performance	50 l / min	32 l / min
Three-point hitch pressure	18 MPa	16 MPa
Load Sensing	No	No
Closed	Yes	No
Central	Yes	No
Constant flow	Yes	Yes
Constant pressure	Yes	No
Control system	flow-compensated	n.d.
Pump	n.d.	gear pump
Two-section distributor	Yes	Yes
Quick couplings	2	2
Auto Lift	No	No

Specs	Ursus C-385A	Zetor 7245
Synchronous transmission	Yes, partial synchronized	No, non-synchronized
Transmission mechanically synchronized	Yes	Yes
PowerShift	No	No
PowerShuttle	Yes, mechanical reverse	No
Additional	Reversing mechanism (mechanical)	–
Hydrostatic transmission	n.d.	n.d.
Forward gears	12	10
Reverse gears	12	2
Creeper	No	No