Case IH MX100C vs Deutz-Fahr DX 4.30 - compare

Compare tractors: Case IH MX100C vs Deutz-Fahr DX 4.30

Case IH MX100C vs Deutz-Fahr DX 4.30 compare - general information

Specs Case IH MX100C Deutz-Fahr DX 4.30
Brand Case IH Deutz-Fahr
Model Case IH MX100C Deutz-Fahr DX 4.30
Series n.d. n.d.
Previous model
Next model
Smaller Case IH MX90C
Larger
Years from 1998 to 2002 y. from 1983 to 1989 y.
Cab with ROPS No No
Reviews Case IH MX100C reviews New! Deutz-Fahr DX 4.30 reviews New!

Case IH MX100C vs Deutz-Fahr DX 4.30 - performance

Specs Case IH MX100C Deutz-Fahr DX 4.30
Maximum power (HP / kW) 100 KM (74.6 kW) 75 KM (55.9 kW)
Engine RPM 2200 rpm 2300 rpm
Fuel consumption n.d. n.d.
Fuel tank capacity n.d. n.d.
Max. speed n.d. n.d.

Case IH MX100C vs Deutz-Fahr DX 4.30 - engine

Specs Case IH MX100C Deutz-Fahr DX 4.30
Fuel type Diesel Diesel
Engine producer n.d. Deutz
Engine model Perkins Deutz
Engine type Diesel (diesel engine) Diesel (diesel engine)
Engine capacity 3.989 l. 4.1 l.
Strokes, qty n.d. n.d.
Cylinders 4 4
Compression n.d. n.d.
Bore 100 mm 100 mm
Stroke 127 mm 123 mm
Maximum torque n.d. n.d.
Air filter n.d. n.d.
Fuel filter n.d. n.d.
Fuel filter chambers, qty n.d. n.d.
Oil filter n.d. n.d.
Oil pump n.d. n.d.
Speed control (control) n.d. n.d.
Injection pump n.d. n.d.
Injectors n.d. n.d.
Injection pressure n.d. n.d.
Cooling system liquid cooled engine n.d.
Forced cooling n.d. n.d.
Cooler Yes
Thermostat Yes
Cooler type tubular-plate cooler
Coolant system capacity n.d. n.d.
Clutch n.d. n.d.

Case IH MX100C vs Deutz-Fahr DX 4.30 - turbocharger

Specs Case IH MX100C Deutz-Fahr DX 4.30
Turbocharger Yes No
Dual turbocharger No Not applicable
Intercooler No Not applicable
Aftercooler No Not applicable
Wastegate valve No Not applicable
Variable geometry No Not applicable
Additional parameters

Case IH MX100C vs Deutz-Fahr DX 4.30 - electronics

Specs Case IH MX100C Deutz-Fahr DX 4.30
Supply voltage starter (V) 12 V n.d.
Ground negative ground n.d.
Battery (V) 12 V n.d.
Battery, qty 1 n.d.
Charging system Alternator Generator
Charging system producer n.d. n.d.
Ignition Manual Manual
Rear stop lamp Yes Yes
Rear agricultural lamp n.d. n.d.
Cock lamp No No

Case IH MX100C vs Deutz-Fahr DX 4.30 - PTO

Specs Case IH MX100C Deutz-Fahr DX 4.30
PTO rpm 540 rpm 540 rpm
PTO control manual manual

Case IH MX100C vs Deutz-Fahr DX 4.30 - brakes

Specs Case IH MX100C Deutz-Fahr DX 4.30
ABS No No
Brake assist No No
Braking system n.d. n.d.
Differential Yes No
Brake type disc brakes, wet brakes, hydraulic n.d.
Discs Single

Case IH MX100C vs Deutz-Fahr DX 4.30 - dimensions

Specs Case IH MX100C Deutz-Fahr DX 4.30
Weight from 4750 kg (depending by model) from 3600 kg (depending by model)
Weight with ROPS n.d. n.d.
Weight with cab n.d. n.d.
Length 4333 mm 4090 mm
Height n.d. 2670 mm
Width n.d. n.d.
Clearance n.d. n.d.
Rear clearance n.d. n.d.
Front track width n.d. n.d.
Rear track width n.d. n.d.
Wheelbase 2420 mm 2400 mm
Front tires 14.9R24 10-16
Rear tires n.d. n.d.
Max. mass of the trailer without brakes 1500 kg 1500 kg
Max. mass of the trailer with brakes n.d. n.d.
Max. axle load n.d. n.d.
Max. total weight n.d. n.d.
Turning radius n.d. n.d.

Case IH MX100C vs Deutz-Fahr DX 4.30 - drive

Specs Case IH MX100C Deutz-Fahr DX 4.30
Drive system 4x4, MFWD, 4WD (depending by model) 4x2, 2WD (depending by model)
Additional all-wheel drive, all four wheels at all times and it can be used full, front drive axle, mechanical drive, front drive axle one wheel drive
Permanent 4-wheel drive Yes n.d.
Permanent systems that constantly power all the wheels Yes n/a
Dynamic allocation of power between the axles n.d., AWD drive n/a
Independent Link Suspension None None
Articulated suspension
Crawler drive No No
Hydrostatic steering Yes No
Differential n.d. n.d.
Steering rod rod
Front rods n.d. n.d.
Rear planetary drives n.d. n.d.
Front planetary drives n.d. n.d.

Case IH MX100C vs Deutz-Fahr DX 4.30 - hydraulics

Specs Case IH MX100C Deutz-Fahr DX 4.30
Three-point hitch n.d. n.d.
Three-point hitch type n.d. n.d.
Three-point hitch performance n.d. n.d.
Three-point hitch pressure n.d. n.d.
Load Sensing No No
Closed n.d. n.d.
Central No No
Constant flow No No
Constant pressure No No
Control system n.d. n.d.
Pump n.d. n.d.
Two-section distributor n.d. n.d.
Quick couplings n.d. n.d.
Auto Lift n.d. n.d.

Case IH MX100C vs Deutz-Fahr DX 4.30 - transmission

Specs Case IH MX100C Deutz-Fahr DX 4.30
Synchronous transmission n.d. n.d.
Transmission mechanically synchronized No, electro-hydraulic control n/a
PowerShift Yes No
PowerShuttle No No
Additional two clutches (dual clutch gearbox), electro-hydraulic clutch control, fast shifting
Hydrostatic transmission n.d. n.d.
Forward gears 32 18
Reverse gears 24 6
Creeper n.d. n.d.

Case IH MX100C vs Deutz-Fahr DX 4.30 - equipment

Specs Case IH MX100C Deutz-Fahr DX 4.30
Clevis Yes (???) Yes (???)
Lower catch n.d. n.d.
Air conditioning n.d. n.d.