Deutz-Fahr DX 4.30 vs International Harvester 744 - compare

Deutz-Fahr DX 4.30 vs International Harvester 744 compare - general information

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Brand	Deutz-Fahr	International Harvester
Model	Deutz-Fahr DX 4.30	International Harvester 744
Series	n.d.	n.d.
Previous model	–	–
Next model	–	–
Smaller	–	–
Larger	–	–
Years	from 1983 to 1989 y.	from 1974 to 1980 y.
Cab with ROPS	No	No
Reviews	Deutz-Fahr DX 4.30 reviews New!	International Harvester 744 reviews New!

Deutz-Fahr DX 4.30 vs International Harvester 744 - performance

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Maximum power (HP / kW)	75 KM (55.9 kW)	70 KM (52.2 kW)
Engine RPM	2300 rpm	2300 rpm
Fuel consumption	n.d.	n.d.
Fuel tank capacity	n.d.	n.d.
Max. speed	n.d.	n.d.

Deutz-Fahr DX 4.30 vs International Harvester 744 - engine

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Fuel type	Diesel	Diesel
Engine producer	Deutz	International Harvester
Engine model	Deutz	International Harvester
Engine type	Diesel (diesel engine)	Diesel (diesel engine)
Engine capacity	4.1 l.	3.9 l.
Strokes, qty	n.d.	n.d.
Cylinders	4	4
Compression	n.d.	n.d.
Bore	100 mm	98 mm
Stroke	123 mm	129 mm
Maximum torque	n.d.	n.d.
Air filter	n.d.	n.d.
Fuel filter	n.d.	n.d.
Fuel filter chambers, qty	n.d.	n.d.
Oil filter	n.d.	n.d.
Oil pump	n.d.	n.d.
Speed control (control)	n.d.	n.d.
Injection pump	n.d.	n.d.
Injectors	n.d.	n.d.
Injection pressure	n.d.	n.d.
Cooling system	n.d.	liquid cooled engine
Forced cooling	n.d.	n.d.
Cooler		Yes
Thermostat		Yes
Cooler type		tubular-plate cooler
Coolant system capacity	n.d.	n.d.
Clutch	n.d.	n.d.

Deutz-Fahr DX 4.30 vs International Harvester 744 - turbocharger

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Turbocharger	No	No
Dual turbocharger	Not applicable	Not applicable
Intercooler	Not applicable	Not applicable
Aftercooler	Not applicable	Not applicable
Wastegate valve	Not applicable	Not applicable
Variable geometry	Not applicable	Not applicable
Additional parameters	–	–

Deutz-Fahr DX 4.30 vs International Harvester 744 - electronics

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Supply voltage starter (V)	n.d.	n.d.
Ground	n.d.	n.d.
Battery (V)	n.d.	n.d.
Battery, qty	n.d.	n.d.
Charging system	Generator	Generator
Charging system producer	n.d.	n.d.
Ignition	Manual	Manual
Rear stop lamp	Yes	Yes
Rear agricultural lamp	n.d.	n.d.
Cock lamp	No	No

Deutz-Fahr DX 4.30 vs International Harvester 744 - PTO

Specs	Deutz-Fahr DX 4.30	International Harvester 744
PTO rpm	540 rpm	540 rpm
PTO control	manual	manual

Deutz-Fahr DX 4.30 vs International Harvester 744 - brakes

Specs	Deutz-Fahr DX 4.30	International Harvester 744
ABS	No	No
Brake assist	No	No
Braking system	n.d.	n.d.
Differential	No	No
Brake type	n.d.	n.d.
Discs	–	–

Deutz-Fahr DX 4.30 vs International Harvester 744 - dimensions

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Weight	from 3600 kg (depending by model)	from 3080 kg (depending by model)
Weight with ROPS	n.d.	n.d.
Weight with cab	n.d.	n.d.
Length	4090 mm	3520 mm
Height	2670 mm	2550 mm
Width	n.d.	n.d.
Clearance	n.d.	n.d.
Rear clearance	n.d.	n.d.
Front track width	n.d.	n.d.
Rear track width	n.d.	n.d.
Wheelbase	2400 mm	2230 mm
Front tires	10-16	7.50-18
Rear tires	n.d.	n.d.
Max. mass of the trailer without brakes	1500 kg	1500 kg
Max. mass of the trailer with brakes	n.d.	n.d.
Max. axle load	n.d.	n.d.
Max. total weight	n.d.	n.d.
Turning radius	n.d.	n.d.

Deutz-Fahr DX 4.30 vs International Harvester 744 - drive

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Drive system	4x2, 2WD (depending by model)	4x2, 2WD (depending by model)
Additional	one wheel drive	one wheel drive
Permanent 4-wheel drive	n.d.	n.d.
Permanent systems that constantly power all the wheels	n/a	n/a
Dynamic allocation of power between the axles	n/a	n/a
Independent Link Suspension	None	None
Articulated suspension	–	–
Crawler drive	No	No
Hydrostatic steering	No	No
Differential	n.d.	n.d.
Steering	rod	rod
Front rods	n.d.	n.d.
Rear planetary drives	n.d.	n.d.
Front planetary drives	n.d.	n.d.

Deutz-Fahr DX 4.30 vs International Harvester 744 - hydraulics

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Three-point hitch	n.d.	n.d.
Three-point hitch type	n.d.	n.d.
Three-point hitch performance	n.d.	n.d.
Three-point hitch pressure	n.d.	n.d.
Load Sensing	No	No
Closed	n.d.	n.d.
Central	No	No
Constant flow	No	No
Constant pressure	No	No
Control system	n.d.	n.d.
Pump	n.d.	n.d.
Two-section distributor	n.d.	n.d.
Quick couplings	n.d.	n.d.
Auto Lift	n.d.	n.d.

Deutz-Fahr DX 4.30 vs International Harvester 744 - transmission

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Synchronous transmission	n.d.	n.d.
Transmission mechanically synchronized	n/a	n/a
PowerShift	No	No
PowerShuttle	No	No
Additional	–	–
Hydrostatic transmission	n.d.	n.d.
Forward gears	18	8
Reverse gears	6	4
Creeper	n.d.	n.d.

Deutz-Fahr DX 4.30 vs International Harvester 744 - equipment

Specs	Deutz-Fahr DX 4.30	International Harvester 744
Clevis	Yes (???)	Yes (???)
Lower catch	n.d.	n.d.
Air conditioning	n.d.	n.d.